Grow Room Setup Guide

Grow Room Setup

Grow Room
Grow Room

Setting up your own grow room is likely to be one of the most physically comprehensive elements of growing your cannabis indoors. The room may be anything from a bedroom dresser to your own home constructed grow box. There are few things to take into account when deciding on the growing area.

Temperature

The temperatures in the grow room really should not be extremely hot or cold. Cannabis enjoys temperature ranges between 70 and 85 degrees. Remember the fact that your cannabis grow lights will heighten the temperature.

Should you wish to grow within an area that can’t deliver temperature within this range, you’ve got to acquire heating units or air conditioning units, and this can be challenging for some newbie growers.

Humidity

The room must not be extremely moist or possibly too dry. Cannabis favors approximately 40-60% humidity, so ensure that you can easily maintain your humidity level within this range. You should use an air humidifier or perhaps a dehumidifier when necessary.

Light

You should separate your grow room from exterior lighting. You should also divide the grow room out of external lighting sources. Light leaking outside the growing area can indeed suggest people that something is happening so if you’re aiming to cover up your indoor growing from people, this can be a dead giveaway.

Even more important, the plants should have as minimum lamination as it can be throughout their lights-off phases. Cardboard and duct tape are an easy way to close light leaks.

Grow Room Size

The area you ultimately choose for growing cannabis needs to be high enough to hold up an adult plant (is dependent upon the strain) and definitely will require sufficient working surface to support as many plants as you decide to grow.

Location

Location is crucial. You do not want the plants in high traffic locations where they could be noticed, or people may disrupt their optimal growing.

Besides, you should not grow someplace alongside electric gear or heating systems. When you have to get repairs done, the serviceman may discover your crop.

Grow room circulation system

Grow Room Setup Guide 2Once you have identified an appropriate area to establish your grow room, you’re ready to begin to build. Your first mission would be to set up the circulation system.

For smaller operations (1-3 cannabis crops) circulation may easily be opening the door to check out your plants daily, but having good flow is very important to keep up humidity and temperature.

Additionally, crops exude waste material throughout their leaves, and when this gathers up, it could be harmful to the plants.

A useful source of circulation is a simple CPU fan attached to an AC adapter. These can be connected relatively merely, but any fan is appropriate.

The fan needs to be used to acquire air in coming from an opening and needs to expel it at an exhaust hole on the other side of the room.

You should never allow too much light leak throughout the exhaust system from your cannabis grow room!

Light reflection

Grow Room Setup Guide 4Next, you should do cover the walls with some reflective materials. It is often as easy as painting the walls with white color; however, for optimum reflection, I would recommend making use of Mylar wall-covering.

Mylar can be acquired relatively at low costs at any grow supply shop. It should be put on the walls smoothly and as entirely as it can be. Duct tape works well with firmly sticking it on the walls.

Control the Light height

Grow Room Setup Guide 6Then you’ll need to have some platform to hold your lighting fixtures. It could be a panel containing CFL’s in clamps, several fluorescent tubes, or perhaps MH/HPS ballast.

The platform needs to be of a modifiable height to accommodate the growing cannabis plants. I would suggest having a chain attached to the ceiling to ensure that you can easily raise it as the crops develop.

Make sure whatever you decide and attach your lights to is capable of holding the weight of your in some cases heavy lighting fixtures. Hook up the lights to a programmed timer designed to keep control of the light cycles.

Final thought

Grow Room Setup Guide 8Now you are done. Your last task would be to make sure to seal the area when it comes to light. It could be useful to position some plastic-type surface on the floor to avoid damage from water.

The method that you use to construct your grow room depends on you. However, the information on this guide will help a bit. Let the creativity flow and enjoy yourself; you will end up investing lots of time here.

You can now germinate your seeds or discover ways to try to avoid damaging pest infestations in your cannabis grow.

This guide presumes that you are only planning to have one grow area. Should you be considering working with a more crucial growing process where you would wish to be cropping as frequently as you possibly can.

You might need to start thinking about using two different sections, or two separate grow rooms altogether, one for the Vegetative Period and yet another for the Flowering Phase.

Growing cannabis in this way is usually identified as Sea of Green.

Close Menu